CPM-700
Click to enlarge
The CPM-700 is a broadband receiver designed to detect and locate all major types of electronic surveillance devices including room, phone, body bugs, video transmitters, and tape recorders.
Broadband receivers such as the CPM-700 provide a very important cost-effective tool for professional sweep teams, government security personnel, and private citizens with important security needs. The CPM-700 is very effective for rapidly detecting and locating transmitted signals, while being very easy to learn to use. The CPM-700 sweep kit includes a custom Cordura case that contains all items necessary to conduct a professional sweep.
CPM-700 Advantages Portable Sweep Kit - provides everything needed to perform a professional sweep; fits inside a standard briefcase. Multi-Functional Utility - Comes with probes to detect RF transmitters (audio and video), carrier current transmitters, and telephone bugs. Probes also available to detect for infrared transmitters, tape recorders, and acoustic leakage.
Wideband Coverage - from 200Hz to over 3GHz with no holes or gaps.
Monitor Mode - after a sweep, the alarm monitor (silent or audible alert) guards against new devices brought in or remote control activation of surveillance devices.
Auxiliary Audio Input - allows user to listen to telephones or lines for "hotmikes," hookswitch by-pass and "infinity" bugs. Unknown wires and cables can be tested for wired microphones.
Specifications R.F. Probe: Gain: 20dB nominal Frequency Response: 50kHz-2GHz ±3dB 3GHz-10dB Sensitivity: -62dBm (1 segment) -85dBm M.D.L. VLF Probe:
Frequency Response: 15kHz-1MHz-3dB MAX input voltage: 300 VAC 50-60Hz Isolation: 1500 VAC 60Hz Sensitivity: -38dBm (1 segment) -60 M.D.L. Audio Amplifier:
Input Impedance: 50K Ohm balanced Input Range: 1.7uV-10V (135dB) AGC Dynamic Range: 100dB (high and low gain) Frequency Response:100Hz- 15kHz±3dB (filtered) 500Hz-24dB/octave, 2.5kHz-18dB/octave Headphone Output: 5Vp-p 220 Record Out: 25 mVp-p nominal with AGC Display:
LCD bargraph: 18 segment with pulsing single segment trip point 50dB dynamic range (1 segment High Gain to MAX Low Gain) Alert Output: 2.8kHz tone or silent red LED at 2Hz Remote Output: N.O. contact (300mA 25V MAX) Battery:
8 ea. MN1500 AA Alkaline - Life 10-16 hrs (Optional) 8 ea. 550mAh NiCad - life 3-5 hrs per charge Low Battery Indicator: approx. 10% remaining power AC adpter/Charger:
Input: 95-l30VAC 50-60Hz, or 200-275VAC 50-60Hz Output: 12VDC with 500mA NiCad Recharge Time: 8-10 hrs
CPM-700 Unit:
Size: 9 1/8 x 6 1/8 x 1 3/4 in, 23.2 x 15.6 x 4.4 cm Weight: 39 oz, 1.1 kg
Carry Case with all standard Items:
Size: 16 3/8 x 11 1/4 x 3 in, 41.6 x 28.6 x 7.6cm Weight: 7 lbs, 3.18 kg
Upgrades and Accesories for the Countersurveillance Probe/Monitor IRP-700 - CPM Infrared Probe MLP-700 - CPM Magnetic Leakage Probe ALP-700 - CPM Acoustic Leakage Probe MPA-700 - Modular Phone Adaptor TRP-700 - Tape Recorder Patch Cable CLA-700 - Cigarette Lighter Adaptor NCB-700 - CPM Ni-Cad Battery Pack BMP-1200 - CPM Broadband Microwave Probe
The CPM-700 is a broadband receiver designed to detect and locate all major types of electronic surveillance devices including room, phone, body bugs, video transmitters, and tape recorders.
Broadband receivers such as the CPM-700 provide a very important cost-effective tool for professional sweep teams, government security personnel, and private citizens with important security needs. The CPM-700 is very effective for rapidly detecting and locating transmitted signals, while being very easy to learn to use. The CPM-700 sweep kit includes a custom Cordura case that contains all items necessary to conduct a professional sweep.
CPM-700 Advantages Portable Sweep Kit - provides everything needed to perform a professional sweep; fits inside a standard briefcase. Multi-Functional Utility - Comes with probes to detect RF transmitters (audio and video), carrier current transmitters, and telephone bugs. Probes also available to detect for infrared transmitters, tape recorders, and acoustic leakage.
Wideband Coverage - from 200Hz to over 3GHz with no holes or gaps.
Monitor Mode - after a sweep, the alarm monitor (silent or audible alert) guards against new devices brought in or remote control activation of surveillance devices.
Auxiliary Audio Input - allows user to listen to telephones or lines for "hotmikes," hookswitch by-pass and "infinity" bugs. Unknown wires and cables can be tested for wired microphones.
Specifications R.F. Probe: Gain: 20dB nominal Frequency Response: 50kHz-2GHz ±3dB 3GHz-10dB Sensitivity: -62dBm (1 segment) -85dBm M.D.L. VLF Probe:
Frequency Response: 15kHz-1MHz-3dB MAX input voltage: 300 VAC 50-60Hz Isolation: 1500 VAC 60Hz Sensitivity: -38dBm (1 segment) -60 M.D.L. Audio Amplifier:
Input Impedance: 50K Ohm balanced Input Range: 1.7uV-10V (135dB) AGC Dynamic Range: 100dB (high and low gain) Frequency Response:100Hz- 15kHz±3dB (filtered) 500Hz-24dB/octave, 2.5kHz-18dB/octave Headphone Output: 5Vp-p 220 Record Out: 25 mVp-p nominal with AGC Display:
LCD bargraph: 18 segment with pulsing single segment trip point 50dB dynamic range (1 segment High Gain to MAX Low Gain) Alert Output: 2.8kHz tone or silent red LED at 2Hz Remote Output: N.O. contact (300mA 25V MAX) Battery:
8 ea. MN1500 AA Alkaline - Life 10-16 hrs (Optional) 8 ea. 550mAh NiCad - life 3-5 hrs per charge Low Battery Indicator: approx. 10% remaining power AC adpter/Charger:
Input: 95-l30VAC 50-60Hz, or 200-275VAC 50-60Hz Output: 12VDC with 500mA NiCad Recharge Time: 8-10 hrs
CPM-700 Unit:
Size: 9 1/8 x 6 1/8 x 1 3/4 in, 23.2 x 15.6 x 4.4 cm Weight: 39 oz, 1.1 kg
Carry Case with all standard Items:
Size: 16 3/8 x 11 1/4 x 3 in, 41.6 x 28.6 x 7.6cm Weight: 7 lbs, 3.18 kg
Upgrades and Accesories for the Countersurveillance Probe/Monitor IRP-700 - CPM Infrared Probe MLP-700 - CPM Magnetic Leakage Probe ALP-700 - CPM Acoustic Leakage Probe MPA-700 - Modular Phone Adaptor TRP-700 - Tape Recorder Patch Cable CLA-700 - Cigarette Lighter Adaptor NCB-700 - CPM Ni-Cad Battery Pack BMP-1200 - CPM Broadband Microwave Probe
